3
recorder’s memory size, this fourth flash can last
for some dozen seconds.
Before use the recorder, charge the rechargeable
battery completely.
Note: It is possible, but is not guaranteed that the
recorder would work when its rechargeable battery
turning off if the solar battery is under the bright
light.
Recording
When the recorder finishes self testing, you can
start recording. Set the switch of recording into the
RECORD position. The voice recorders’ LED will
start blinking in a sequence while the recording is
in progress. To stop recording, set the switch into
the STOP position.
Blinking sequences indicate the rechargeable
battery’s status and available memory space. The
first sequence indicates the rechargeable battery
status: 1 flash – fully charged, 2 flashes – enough
for work, 3 flashes – recharging is required. The
second blinking sequence indicates the amount of
memory available: 1 flash – 76-100%, 2 flashes -
51-75%, 3 flashes – 25-50%, 4 flashes – 1-25%.
