3
Turning the Recorder on
After you inserted the battery, press the button.
Keep it pressed for 2-3 seconds and then release.
The recorder will start self testing. While self testing,
the recorder LED will flash three times and after
a pause the fourth time (if fourth duration will not
occur, the battery is discharged or malfunctioning).
The duration of the fourth flash can last for some
seconds depending on the recorder‘s memory
capacity. To evaluate the battery life in different
modes, use the table data.
Note:
- For the recorder to operate according to the
manufacturer’s standards, use batteries of
well-known brands.
- For the full usage of the battery capacity,
make recordings in modes with low current
consumption (the upper part of the table).
- Attention! Do not use the batteries that
cannot be charged (for instance, alkaline
batteries).
