EdgeMarc 4571/4571W Enterprise Session Border Controller Installation Guide
© Edgewater Networks, Inc. All rights reserved.
7
o
LED Label
o
Description
are used
to connect
to T1/E1
lines.
o
Yellow
o
The destination to which data is being
transmitted has a problem with the signal it is
receiving.
o
Red
o
Data has been corrupted and there is a loss of
signal.
o
H
o
Line
o
6 FXO
ports
o
Off
o
No active call
o
Green
o
Active call
o
I
o
Phone
o
2 FXS
ports
o
Off
o
No active call
o
Green
o
Active call
o
J
o
Erase Button
o
If pressed twice in quick succession, only the CLI password will be
changed back to its original password.
o
If pressed three times in quick succession, the EdgeMarc will revert
back to the factory default settings. This will reset all passwords and
erase all prior configurations. The default LAN address will be set to
192.168.1.1.
o
Caution
o
Using the Erase button as outlined above means any configuration
made to the EdgeMarc 4571/4571W will be lost. Erasing the
configuration means that IP phones installed behind the EdgeMarc
4571/4571W will not work and Internet connectivity or network access
for PCs will be down until the system is reconfigured.
o
K
o
Grounding Port
o
Connects the EdgeMarc 4571/4571W to ground.