© Edgewater Networks, Inc. All rights reserved.
6
Back Panel
o
LED Label
o
Description
A
o
Wireless Antenna
o
Antenna for wireless LAN. Available on 4571W model only.
B
o
Power Connector
o
Accepts the plug from the supplied power cord to connect the unit to
an AC power outlet.
o
C
o
10/100 Mbps
Ethernet LAN
Ports
o
Four (4) Local Area Network (LAN) ports to connect the IP phones or
an Ethernet switch. Unit can also be configured through any of these
ports using the web interface.
D
o
10/100 Mbps
Ethernet WAN
Port
o
Can be used as an alternative or in addition to the T1/E1 WAN ports.
This port is typically used when connecting the EdgeMarc
4571/4571W to an existing WAN router, cable or xDSL modem.
o
E
o
USB Ports
o
2 (Version 2.0) x USB ports can be used for Evolution Data Optimized
(EVDO) WAN connections and maintenance functions.
o
F
o
Console Port
o
This port is used to establish a local console session with the
EdgeMarc 4571/4571W using a VT100 terminal or emulation program.
The cable required is a Male to Female straight-through DB-9 cable.
The serial port uses a baud rate of 9600, 8 data bits, 1 stop bit and no
parity.
o
This port is used for debug or local diagnostic purposes only. Primary
configuration of the EdgeMarc 4571/4571W is performed from a web
browser as covered in
Edgewater Networks
VoIP Operating System
(VOS) for EdgeMarc User Manual
.
o
G
o
T1/E1 WAN Ports
and LEDs
o
4 T1/E1
ports that
o
Off
o
T1 cable is not connected to the device.
o
Green
o
T1 is in sync.