Edgetech USBL BROADBAND ACOUSTIC TRACKING SYSTEM Скачать руководство пользователя | Manualshive

Страница: 9 / 102

background image

ix

RETURNED MATERIAL AUTHORIZATION

Prior to returning any equipment to EdgeTech, a Returned Material Authorization (RMA) number must be
obtained. The RMA will help identify returned equipment when it arrives at our receiving dock and enables
tracking of the equipment while at our facility. The material should be shipped to

EdgeTech, 4 Little Brook

Road, West Wareham, MA 02576

. Refer to the RMA number on all documents and correspondences.

All returned materials must be shipped prepaid. Freight collect shipments will not be accepted. EdgeTech
will pay freight charges on materials going back to the customer after they have been evaluated and/or
repaired. If the equipment is the property of EdgeTech, please insure for full value.
All shipments must be accompanied by three copies of your proforma invoice, with the value of the
material, and the reason for return. If the reason is for repair, it must be clearly stated in order to move
through customs quickly and without duties being charged. Whenever possible, please send copies of
original export shipping documents with the consignment. Fax one invoice, packing list, and a copy of the
airway bill to EdgeTech upon shipment to EdgeTech’s Main Office

Fax: 1-508-291-2491

.

If there is more than one item per consignment, a packing list must accompany the shipment, which can
be combined with the proforma invoice and packing list if the contents of each carton are clearly
numbered and identified on the invoice.

CAUTION!

Never attempt to ship a Portable Topside, it in its Storm Case

TM

alone.

Although rugged, these cases are not intended to be used as shipping
containers, and the delicate internal components could be damaged if
used in this manner.

Note:

All shipping charges shall be the responsibility of the customer, and

the return shipment will be sent on the customer’s account.

Foreign and Domestic Shipping Return Instructions

1.

The items must be sent prepaid to our door – using a reputable company. Freight collect
shipments will not be accepted. Small items can be shipped prepaid directly to EdgeTech via
FedEx, DHL, UPS, Airborne, etc.

2.

For your protection, the items should be fully insured. EdgeTech will not assume any responsibility
for damage to the shipment while in transit inbound or outbound.

3.

Items within the warranty period must be sent prepaid to our door – using a reputable company.
EdgeTech will only pay for return shipping charges, if damage was not caused by misuse.

«
...
7
8
9
10
11
...
»

Содержание USBL BROADBAND ACOUSTIC TRACKING SYSTEM







































































































Отзывы:

Нет отзывов

Похожие инструкции для USBL BROADBAND ACOUSTIC TRACKING SYSTEM

Бренд: Navigon Страницы: 2

Бренд: Jensen Страницы: 2

Бренд: X-Trax Страницы: 6

UNIVERSAL TRACKER

Бренд: TRACKIMO Страницы: 19

Hyundai Santa Fe

Бренд: Rosen Страницы: 16

GPSMAP 8 10 Series

Бренд: Garmin Страницы: 204

Бренд: Chinavision Страницы: 17

Бренд: Hardi Страницы: 30

ECHOMAP UHD2 5 Series

Бренд: Garmin Страницы: 76

Earthmate LT-40

Бренд: DeLorme Страницы: 1

Бренд: Javad Страницы: 92

Бренд: Enfora Страницы: 54

Бренд: Eelink Страницы: 13

Бренд: Eelink Страницы: 20

Бренд: It’s Mine Technology Страницы: 12

Бренд: Koden Страницы: 8

Бренд: Shenzhen V-san Electronics Страницы: 36

Бренд: Cobra Страницы: 104

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды