EdgeStar RP401MED, Руководство пользователя

Страница: 11 / 19

6
Installing and Removing the Shelves
Installing the Shelves
1. Open the door completely.
2. Ensure that the plastic posts are installed on the left and right sides of the shelf track
onto which you are attempting to install the shelf.
3. Lifting the rear of the shelf upwards above the shelf track, align the left and right sides
of the shelf over the plastic posts mounted to the inner cabinet.
4. Gently set the shelf down on the shelf track.
Removing the Shelves
1. Open the door completely.
2. Make sure the shelf is pushed back completely.
3. Lift either the left or right side of the shelf to create a 45° angle from its original
position. Make sure not to lift either side of the shelf too hard as it may come in
contact with the inner wall mount.
4. Pull the shelf outward until it is removed from the inner compartment. You may
encounter some resistance from the shelf guard rail.
Operation
Installation Check List Before Operation
1. Have all packing materials and tape been removed from the interior and exterior of the
medical refrigerator?
2. Have the installation instructions been followed, including connecting the machine to
electricity? And has proper grounding been installed for the medical refrigerator?
3. Has the machine been leveled?
4. Is the medical refrigerator in a site where the ambient temperature is between 50° F
and 95° F all year round?
5. Is there a clearance of at least 5
” at the rear, 3” at the top, and 3” at the sides for proper
air circulation?
Tip: To prevent damaging the door gasket, make sure to open the door fully before pulling the
shelves out of their track.