15
Control Panel (on Rear)
Description of LEDs and Buttons:
1.
Ice Full (Red) LED
: Ice full indicator light.
When this LED is lit, the ice storage bin is full of ice or there is something obstructing the ice-
full probe. The unit will stop producing ice. When ice cubes are removed from the ice storage
bin, freeing the ice-full probe, the red LED will remain flashing for 3 minutes. Then the unit will
restart and return to the ice making mode.
2.
Ice Making (Green) LED
: Ice making indicator light.
When this LED is lit, the unit is working in the ice making mode, controlled by a temperature
probe on the evaporator. When the green LED is flashing, the unit is working in the Ice Making
mode controlled by a fixed timer.
3.
Ice Harvest (Yellow) LED
: Ice harvest indicator light.
When this LED is lit, the unit is working in the Ice Harvest mode controlled by the ice-full probe.
When the green and yellow LEDs are lit, the unit is working in the Cold Preservation stage.
4.
Mode button
: Mainly for service.
When this button is pressed, the unit can change from Ice Making mode to Ice Harvest
mode, or from Ice Harvest mode to Ice Making mode. The mode can be determined from the
status of the green and yellow LEDs.
5.
Ice Size Adjust
: When
the “Adjust” button is pressed and held for 3 seconds, the unit will
enter the Ice Size Adjustment mode. Once in this mode, press
“Clean” to decrease the ice
size, or press
“Mode” to increase the ice size. Please note that there are five larger ice sizes
and five smaller ice sizes from the default. The current ice size can be determined from the
status of the red, green, and yellow LEDs. The green, yellow, and red LEDs flashing
synchronously indicates the default ice size. When decreasing the ice size wi
th the “Clean”
button, the red LED will flash once and the green LED will flash continuously. The red and
green LEDs flashing synchronously indicate that the smallest ice size has been reached.
When increasing the ice size with the
“Mode” button, the yellow LED will flash once and the
green LED will flash continuously. The yellow and green LEDs flashing synchronously
indicate that the largest ice size has been reached.