6
6. HOW TO REMOVE THE SHELVES
To prevent damaging the door gasket, make sure to have the door all the way opened when pulling the bottom
shelf out of the rail compartment.
For easy access to the storage content, you must pull the shelf approximately 1/2 out of the rail compartment,
however this unit was designed with a plastic post on each sides of the shelf track to prevent bottles from
falling.
When removing the shelf out of the inner rail, make sure to remove all items first. Then move the shelf to the
position where the notch of shelf is exactly under the plastic post and lift the shelf. In order to replace the shelf,
repeat steps described above in reverse.
7. HOW TO REPLACE THE MAIN PARTS
7.1 REPLACING THE CONTROL PCB, DISPLAY PCB, UPPER ZONE SENSER & UPPER ZONE LED
ASSEMBLY
1. Remove all the shelves”.
2. Remove one screw that are used to fix the lamp
cover with the cabinet.
3. Take away the lamp cover.
4. Disconnect the wire of LED assembly.
5. Press the plastic nail supporting the LED assembly
with forefinger and thumb,pull the LED assembly
upward,take away it ,then you can replace the new
LED assembly.