4
3. COMPRESSOR ROOM VIEW AND PARTS LIST
1. Junction Box
2. Electrical Box of Compressor
3. Process Pipe
4. Outlet Pipe of Condenser
5. Compressor
6. Dry Filter
7. Dry Filter Clamp
8. Suction Pipe
9. Capillary
10. Discharge Pipe
11. Condenser Fan Motor
12. Drain Pipe
13. Water Drip Tray
14. Rear Leveling Leg
15. Compressor Base
16. Compressor Leg
17. Power Supply Cord with Plug
4. HOW TO REVERSE THE DOOR SWING
This appliance has the capability of the door opening from either the left or right side. The unit is delivered
to you with the door opening from the left side. Should you desire to reverse the opening direction, please
follow these instructions.
Note: All parts removed must be saved to do the reinstatement of door.
1. Open the glass door and remove the two screws
under the right bottom corner of the glass door that
are used to hold the lower hinge to the glass door.
Be careful to hold the glass door with hands from
dropping after removing the screws.
2. Pull down to remove the glass door and place it on a
padded surface to prevent scratching it.
3. Remove the right upper hinge . Install the left upper
hinge from the plastic bag that includes the
instruction manual.
4. Remove the two decoration screws underneath the lower
left corner of glass door.Then install and tighten them at
the opposite designated holes.. Remove the lower
door hinge supporter and bush.