12
5. Install the bottom support bracket on the left side and install the lower hinge and
bushing on the bottom support bracket. Remove the decorative screws from the left
corner of the door and install and tighten them to the right corner holes. Remove the
plastic cap from the top left corner of the door and insert it into the top right corner.
6.
Carefully insert the door into the upper left corner hinge, then slide the door on top of
the lower hinge and secure the door by installing the lower screws.
7.
Remove the door handle and install it on the right side of the door. Please see the
“Installing the Door Handle”
section for detailed instructions.
Removing and Installing Decorative Plugs
Follow the instructions below to remove the decorative plugs from the door.
1. Open the door and carefully pull the door gasket from the top left corner until you have
exposed the two holes which correspond with the decorative plugs.
2. Insert a Flathead screwdriver through the gasket side of the door into the decorative plug
slot. You may need to use a flashlight to help guide you through this process.
Important: Before you begin, unplug the refrigerator.
