EdgeStar CWB1760FD, Руководство по обслуживанию

Страница: 35 / 57

8.4 Replacing the Power PCB (CWB1760FD and CWB8420DZ)
1. Remove the five screws
○
1 that fix the rear grill
○
2 to the cabinet.
2. Remove the screws
○
3 and
○
6 that hold the electrical box to the side of the cabinet.
3. Pull out the electrical box base
○
4 and cover
○
7 and Power PCB
○
5 .
4. Disconnect the cables from the Power PCB and replace it.
8.5 Replacing the Condenser Fan (CWB1760FD and CWB8420DZ)
1. Disconnect the condenser fan motor lead connector from the cable or power PCB inside the
electrical box.
2. Remove the two screws
○
1 that mount the fan motor
○
4 to the compressor base
○
2 .
3. Take out the condenser fan motor, remove it from its bracket and replace it. Make sure to refit
the bracket and the rubber washers
○
3 in their original positions.