9
Control Panel Overview
Note: Use the Remote Control to change modes, fan speed, timer,
and temperature settings.
Warning Light- Condensed water may accumulate in
the unit. The Warning light will turn on to indicate if
the internal tank becomes full. The unit will not
operate until it has been drained.
Power- The power button will allow you to turn the
unit on or off.
Mode Control- Press mode button to cycle between
the three different modes: Cool, Dehumidify, and
Fan.
Fan Speed- When the unit is running in Cool or Fan
mode, press the Fan speed button to select the fan
speed desired. There are three speeds: High,
Medium, and Low.
Timer- The timer can be used to either turn the unit
on or off after a number of elapsed hours.
Up and Down- Press to increase or decrease the set
temperature. elapsed hours.