Error Messages:
If this message shows up, one possible reason is your Windows OS installation is not complete. (Please
make sure the path \WINDOWS\COMMAND\EBD in Windows 98, \WINDOWS\COMMAND\EBD in
Windows ME, or \XP_Bootable in Windows XP exists)
If this message shows up, please check to see if the capacity of the “Public Area” is large enough.
Notes:
¾
Once you finish using the program, you will see different disk properties when you select different
disk types. For example, if you set it as an “USB HDD”, you will see the DiskGO! Watch as a hard
disk icon in the Explorer window. If you set it as an “USB ZIP”, you will see the DiskGO! Watch as
a “Removable Disk” icon in the Explorer window. This will only occur if you are using Windows 2000
or above. In Windows 98, it will only appear as a “Removable Disk”.
¾
Once you finish using the program, the device will contain the files necessary to make it bootable.
Do NOT delete any files off of the DiskGO! Watch; it will cause a failure to occur when used as a boot
device for your computer.
¾
When you want to use the DiskGO! Watch to boot your computer, please select the appropriate
setting in the BIOS. Please refer to your computer’s user manual.
¾
The BIOS design of each motherboard is quite different; we can not guarantee that you can use the
