OPERATING INSTRUCTIONS
User Guide
HYDRAFACIAL MD
®
ELITE
™
22
ACTIVATE THE LED LIGHTS (OPTIONAL)
Refer to LED Light Therapy Handpiece User Guide part number 19692 for
details on installation and operation.
1. To operate the LED Lights, go to the Home screen and select
“Modalities.” Then select “LED Light Therapy”.
2. Choose either Red, Blue, or Red & Blue LED Lights.
3. Select 1 Light or 2 Lights, then press Start.
4. An area of the face will light up, guiding you to continue treatment.
5. Follow the instructions on the screen.
ACTIVATE SKIN IMAGING CAMERA
1. To operate the camera, go to the Home screen
and select “Camera”.
2. A prompt will appear requesting you to create a
new profi le or select a profi le already in the system.
3. In the member screen, either create a new profi le
or search for a member by name, date of birth or telephone number.
4. After creating a new profi le or selecting the
member’s profi le from the system, the “Photo Capture” button should
turn from gray to blue.
5. To capture a photo, place the chin rest against the
chin. There are three options for capturing a photo:
•
In the member profi le screen, select the “Photo Capture” button or
•
On the camera, press the red button or
•
Use the foot switch to capture a photo. To install the foot switch,
plug the USB cable into one of the USB ports located on the right side
of the unit.
DGETTING STARTED
User Guide
HYDRAFACIAL MD
®
ELITE
™
19
CORDLESS LED LIGHT THERAPY HANDPIECES (Optional)
1. Refer to LED Light Therapy Handpiece User Guide part number 19692
for details on installation and operation.
2. USB ports for cordless LED Handpieces are located within each of the
LED Light holders. Plug the LED handpieces into the appropriate hold-
ers in order to recharge.
SKIN IMAGING CAMERA
1. Attach the tool holder, top fi rst, onto the accessory rail. Tighten
the thumbscrews to lock the tool holder in place.
2. Insert the cable end connector from the camera into the port located
on the right side of the unit. Push in and twist until it is completely
locked.
3. Place the camera on the tool holder when not in use.
UNIVERSAL TOOL HOLDER
1. Loosen thumbscrews fi rst.
2. Attach the tool holder, top fi rst onto the accessory rail.
3. Tighten the thumbscrews to lock the handpiece holder in place.
