JRP Edge Digital Gauge: EGT & Boost + EGT
Page 4 of 5
Manual - EGT + Boost & EGT
Detailed Button Operation
•
Record the date of purchase here for warranty purposes
____________________.
•
The table below shows what to expect when navigating your 52mm Edge series EGT & Boost + EGT gauge, this is more or less an
on the fly cheat sheet to assist you during setup. Best way to understand all the features and functions is to read this whole
instruction manual carefully.
•
For further assistance/ trouble shooting please visit our YouTube channel:
•
Visit our social platforms for new ideas, and to see our latest products:
Alternatively send us a cheeky Dm, were here to help!
CLICK
ICONS TO FOLLOW LINKS
Common Button Operation
•
To make changes to your new gauge use the button on the back of the gauge or the remote button included in each kit.
(Both provide the same function). The button can be used to scroll through the menu. Short press will take you through the menu
options, long press for three seconds on the displayed option will take you into the setup menu for that selection. Make
adjustments to that menu option using short presses, when the setting displays the required value, wait five seconds to return to
live data to be display - Saved. (this will confirm and save your set up option). See page 4 &5 for detailed button operation.
•
NOTE:
Day and night time modes can be set to display different settings shown in table below. You have to enter the night time
mode to make changes to night time menus. (Night mode is triggered from a 12 volt signal input from the yellow power wire).
Long Press
"Symbols blinking"
Short Press
Long Press
Clear peak value
PEAK VALUE
Wait 5 sec to save
Short Press
Long Press
Short Press
Day Mode
Short Press
Night Mode
Wait 5 sec to save
Short Press
Long Press
Short Press
Day Mode
Short Press
Night Mode
Wait 5 sec to save
Short Press
Long Press
Short Press
BUZZER TYPES
Types
Wait 5 sec to save
Short Press
Long Press
There are 4 sound levels: Off, 1, 2, 3.
Short Press
BUZZER VOLUME
🔇🔈🔉
Silent to loud
Level
Wait 5 sec to save
Short Press
Long Press
Short Press
Types
Wait 5 sec to save
Short Press
Long Press
Short Press
LOW VOLTAGE
WARNING
&
V
Voltage
GAUGE MODE
CONFIGURATION
COLOUR
SELECTION
OPEN/ CLOSE
CEREMONIES
There are two modes for all gauges, night
and day mode. Different colours can be set
for each mode: Red, Green, Blue, Yellow,
Purple, Snow, Mustard,
Pink, Light Blue, Orange, Teal, Off, (RGB).
There are 3 different buzzers available,
gauge will display: and emit corresponding
sound - Beep: slow, fast, continued
…
There are 3 options for the opening
ceremony, wait for change to be saved and
view while turning gauge on/ off.
See gauge Mode Configuration for in depth
explanation on Page 3. HINT: below Each
TY# value shows. V, BAR, PSI & Nothing (EGT
Only).
Customise the voltage(V) value to trigger
alarm. Short press for fine tune adjustment,
long press for rapid number adjustments.
8.0
v to
18
v
br0
►
br1
►
br2
br3
►
br4
►
br5
uo0
►
uo1
►
►
uo2
►
uo3
AC1
►
AC2
►
AC3
Displays "Peak" value in current mode
configuration. NOTE: All peak values are
recorded.
no1
►
no2
►
no3
Wait 5 sec to save
SCREEN
BRIGHTNESS
There are different brightness settings
available to match other instruments in your
vehicle. Night and day mode can be set to
different levels for each mode.
ty1
►
ty2
►
►
ty3
►
ty4
/
SHORT PRESS
SHORT PRESS
SHORT PRESS
SHORT PRESS
SHORT PRESS
SHORT PRESS
SHORT PRESS
LONG PRESS
SHORT PRESS
SHORT PRESS
SHORT PRESS
SHORT PRESS
SHORT PRESS
SHORT PRESS
LONG PRESS
LONG PRESS
LONG PRESS
LONG PRESS
LONG PRESS
LONG PRESS
SHORT PRESS
SHORT PRESS
SHORT PRESS
LONG PRESS