11
Step 5 – Viewing Online Content Wirelessly on Your Frame
1.
Press the ESC key on your digital frame to exit the USB
PC mode and remove the
USB cable from the frame.
2.
Select the
Wi-Fi
icon
on the Device Selection screen. The frame will
automatically connect to your wireless network and the following screen will be
displayed:
3.
Select the Flickr, Picasa or FrameChannel icon and press ENTER to start displaying
your account’s online content.
Note
:
All downloaded pictures from the Internet will automatically be saved to the frame’s
internal memory (FLASH). To view these pictures, go to the FLASH icon from the Device
Selection screen and then go to Photo.
Reconnecting the Digital Frame to a Wireless Network
Your wireless connection is stored on the digital frame’s internal memory. Unless you change
wireless networks or your network password is changed, you do not need to re-scan for
networks each time you use your frame. Follow steps 1-5 above again in order to re-connect
the frame with Flickr, Picasa or FrameChannel in the event something is changed.
Adding a new Flickr, Picasa, or FrameChannel Account
If you would like to add a new photo service account to your frame, run the EDGE Wi-Fi Setup
Utility and follow steps 3-5 above.
