Edge CS2, Быстрая установка

Страница: 5 / 9

Step 6: Position and Viewing Placement
VERIFY POSITION AND VIEWING PLACEMENT
After you've locked the mount and the
device is in place оп your windshield, sit
back in your driver's seat and make sure
the viewing angle is as desired. Check to
make sure the device does not create а
Ыind spot that may impair your view of
the road/traffic/pedestrians from the
driver's seat.
*NOTE: Some states prohiblt mounting devices
that may obstruct your view. Please check local
and state laws to ensure compliance.
IF NEEDED, USE ТНЕ ADJUSTMENT
KNOB ТО FINE TUNE ТНЕ VIEWING
ANGLE AND HEIGHT OF ТНЕ DEVICE.
VARIABLE ANGLE ADJUSTMENT
This knob will allow you to adjust the
viewing angle of the device in both
horizontal and vertical fashions. Use it
to fine tune your viewing angle.
After positioning the device and the
mount, remove any slack in the саЫе
and coil it behind the side panel you
removed earlier. Use the supplied zip
ties to secure the coiled саЫе from
moving or falling down under the dash,
or interfering with pedal operation.
Replace all panels removed during
installation.
►