Edge CS2, Быстрая установка

Страница: 4 / 9

Step4: Mount and OBDII/HDMI СаЫе
CONNECT ТНЕ MOUNT AND OBDII/HDMI CABLE
Before you attach the suction cup portion of the mount to the window
attach it to the device. lnsert the tabs оп the mount into the slots оп
the back of the device and slide up until it stops.
*NOTE: The mounting tabs are а tight fit Ьу design to maintain а solid connection.
Step5:
Next, insert the HDMI connector оп the
end of the OBDI I са Ые into the back of the
device (this is easier if done prior to
mounting the device оп the window).
*NOTE: The device will power оп automatically when
it detects your vehicle has started. lf you wish to
power up the device without starting your vehicle,
ensure the key is in the run position and touch the
screen (CTS2) or press the ENТER button (CS2).
Position and Lock the Device
LOCK DEVICE ON WINDSHIELD
Once the alcohol has dried you're
ready to attach the mount to the
windshield.
The mount features а locking tab
that creates the suction that will lock
the mount to the windshield. Make
sure the lock is in the "Unlocked"
position. Position the mount where
you've cleaned the windshield, press
firmly, and push the tab to the
"Locked" position.