Edge Products CTS 2, Руководство пользователя

Страница: 34 / 64

34
Turbo Cool Down Setup
Turn On and Use EGT
Turn On and Use Time
Do Not Use Turbo Timer
This feature allows the engine to continue running (after the key is
in the-off position) until one of four conditions have been met:
1. If the EGT value falls below the target set point.
2. The time set expires
3. Pressing either the brake or gas pedal.
4. Touching the display.
Select this option if you
would like the turbo timer
feature to use a pre-de-
termined EGT value.
Select this option if you
would like the turbo timer
feature to use a pre-de-
termined time setting
(seconds).
This option will disable
the turbo timer feature
and take you back to the
previous menu.
The CTS2 is designed to display the back-up camera when the
vehicle is put into reverse. This feature allows you to specify how
many seconds you would like the camera view to wait before it
shows up on the display.
NOTE: This feature is not available on all vehicle makes and
models.
STEP 6 - Select Camera At Startup.
Turning the Camera At Startup feature ON allows the back-up
camera image to automatically come on during the startup of the
display.
STEP 7 - Select Turbo Cool Down Setup. (NOTE: This feature is
only available if an EAS Turbo Timer display has been installed.)
Settings