Edge Products CTS 2, Руководство пользователя

Страница: 12 / 64

12
Cable Installation
STEP 1 - Locate the On Board Diagnostics II (OBDII) port. (This
connector is typically found directly below the driver side dash
console.)
STEP 2 - Plug the
OBDII connector into
the vehicle port.
STEP 3 - Route the
HDMI end up the driver
side dash.
(On most vehicles,
the side panel may be
removed to expose
the underside of the
dash for easier routing.
Leave exposed until
after the display is
installed.)
Windshield Mount Installation
HDMI
OBDII
STEP 1 - Use the Alcohol Wipe to
liberally clean the windshield in the
area you plan to place the suction cup.
Allow the glass to fully dry.
STEP 2 - Firmly press and hold the
suction mount against the glass.
Ensure proper suction before attaching
the device. Windshield mount and device
could detach during operation and result in
injury to the driver.
STEP 3 -
Rotate the Cam Lever
towards the glass to create the suction.
Getting Started
CAUTION