Edge-Core ES3628C Скачать руководство пользователя страница 407

Страница: 407 / 674

Authentication Commands

4-81

dot1x port-control

This command sets the dot1x mode on a port interface. Use the

form to restore

the default.

Syntax

dot1x port-control

{

auto

force-authorized

force-unauthorized

}

no dot1x port-control

•

auto

– Requires a dot1x-aware connected client to be authorized by the

RADIUS server. Clients that are not dot1x-aware will be denied access.

•

force-authorized

– Configures the port to grant access to all clients, either

dot1x-aware or otherwise.

•

force-unauthorized

–

Configures the port to deny access to all clients,

either dot1x-aware or otherwise.

Default

force-authorized

Command Mode

Interface Configuration

Example

dot1x operation-mode

This command allows single or multiple hosts (clients) to connect to an
802.1X-authorized port. Use the

form with no keywords to restore the default to

single host. Use the

form with the

multi-host max-count

keywords to restore the

default maximum count.

Syntax

dot1x operation-mode

{

single-host

multi-host

[

max-count

count

]}

no dot1x operation-mode

[

multi-host max-count

]

•

single-host

– Allows only a single host to connect to this port.

•

multi-host

– Allows multiple host to connect to this port.

•

max-count

– Keyword for the maximum number of hosts.

count

– The maximum number of hosts that can connect to a port.

(Range: 1-1024; Default: 5)

Default

Single-host

Command Mode

Interface Configuration

Console(config)#interface eth 1/2
Console(config-if)#dot1x port-control auto
Console(config-if)#

Содержание ES3628C



































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ES3628C

Отзывы:

Edge-Core ES3628C, Руководство по управлению, Страница: 407 / 674

Результаты поиска

Содержание ES3628C

Отзывы: