background image

 

 

Quick Installation Guide 

ECWO5213-L  Access  Point 

ENGLISH 

 

ii 

FCC CAUTION 

This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B  digital  device, 

pursuant to Part 15 of the FCC Rules.    These limits are designed to provide reasonable protection 

against  harmful  interference  in  a  residential  installation.  This  equipment  generates,  uses  and  can 

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 

cause  harmful  interference  to  radio  communications.  However,  there  is  no  guarantee  that 

interference  will  not  occur  in  a  particular  installation.  If  this  equipment  does  cause  harmful 

interference to radio or television reception, which can be determined by turning the equipment off 

and  on,  the  user  is  encouraged  to  try  to  correct  the  interference  by  one  or  more  of  the  following 

measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect  the  equipment  into  an  outlet  on  a  circuit  different  from  that  to  which  the  receiver  is 

connected. 

 

Consult the dealer or an experienced radio/TV technician for help. 

 

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance 

could void the user's authority to operate this equipment. 

 

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 

 

Radiation Exposure Statement

 

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This 

equipment should be installed and operated with minimum

 distance 31 cm between the radiator & your body. 

 

 

Professional installation instruction 

1.  Installation personal   

This product is designed for specific application and needs to be installed by a qualified personal who has 

RF and related rule knowledge. The general user shall not attempt to install or change the setting. 

2.  Installation location   

The product shall be installed at a location where the radiating antenna can be kept

 31 

cm from nearby 

person in normal operation condition to meet regulatory RF exposure requirement. 

3.  External antenna   

Use  only  the  antennas  which  have  been  approved  by  the  applicant.

 

The  non-approved  antenna(s)  may 

produce unwanted spurious or excessive RF transmitting power which may lead to the violation of 

FCC 

limit  and  is  prohibited.  The  antenna  must  be  installed  completely  perpendicular  to  the  horizon  for 

compliance with FCC Rule Part 15.407(a)(1)(i). 

4.  Installation procedure 

Please refer the handbook for the detail. 

Содержание ECWO5213-L













Отзывы: