manualshive.com logo in svg

Edge-Core ECS4810-12M Layer 2, Руководство по управлению

Поделиться
Скачать
Edge-Core ECS4810-12M Layer 2 Скачать руководство пользователя страница 354

C

HAPTER

 14

  |  Security Measures

Configuring 802.1X Port Authentication

–  354  –

Digest 5), TLS (Transport Layer Security), PEAP (Protected Extensible 

Authentication Protocol), or TTLS (Tunneled Transport Layer Security). The 

client responds to the appropriate method with its credentials, such as a 

password or certificate. The RADIUS server verifies the client credentials 

and responds with an accept or reject packet. If authentication is 

successful, the switch allows the client to access the network. Otherwise, 

non-EAP traffic on the port is blocked or assigned to a guest VLAN based on 

the “intrusion-action” setting. In “multi-host” mode, only one host 

connected to a port needs to pass authentication for all other hosts to be 

granted network access. Similarly, a port can become unauthorized for all 

hosts if one attached host fails re-authentication or sends an EAPOL logoff 

message.

Figure 196:  Configuring Port Security

The operation of 802.1X on the switch requires the following:

◆

The switch must have an IP address assigned.

◆

RADIUS authentication must be enabled on the switch and the IP 

address of the RADIUS server specified.

◆

802.1X must be enabled globally for the switch.

◆

Each switch port that will be used must be set to dot1X “Auto” mode.

◆

Each client that needs to be authenticated must have dot1X client 

software installed and properly configured.

◆

The RADIUS server and 802.1X client support EAP. (The switch only 

supports EAPOL in order to pass the EAP packets from the server to the 

client.)

◆

The RADIUS server and client also have to support the same EAP 

authentication type – MD5, PEAP, TLS, or TTLS. (Native support for 

these encryption methods is provided in Windows 7, Vista and XP, and 

in Windows 2000 with Service Pack 44. To support these encryption 

methods in Windows 95 and 98, you can use the AEGIS dot1x client or 

other comparable client software)

802.1x
client

RADIUS
server

1. Client attempts to access a switch port.
2. Switch sends client an identity request.
3. Client sends back identity information.
4. Switch forwards this to authentication server.
5. Authentication server challenges client.
6. Client responds with proper credentials.
7. Authentication server approves access.
8. Switch grants client access to this port.

Содержание ECS4810-12M Layer 2





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды