Edge-Core ECS4810-12M Layer 2 Скачать руководство пользователя страница 181

Страница: 181 / 1236

HAPTER

| VLAN Configuration

IEEE 802.1Q VLANs

– 181 –

CLI R

EFERENCES

◆

"Configuring VLAN Interfaces" on page 939

◆

"Displaying VLAN Information" on page 945

ARAMETERS

These parameters are displayed:

Edit Member by VLAN

◆

VLAN

– ID of configured VLAN (1-4093).

◆

Interface

– Displays a list of ports or trunks.

◆

Port

– Port Identifier. (Range: 1-12)

◆

Trunk

– Trunk Identifier. (Range: 1-12)

◆

Mode

– Indicates VLAN membership mode for an interface.

(Default: Hybrid)

■

Access

- Sets the port to operate as an untagged interface. The

port transmits and receives untagged frames on a single VLAN only.
Access mode is mutually exclusive with VLAN trunking (see

"VLAN

Trunking" on page 173

). If VLAN trunking is enabled on an

interface, then that interface cannot be set to access mode, and

vice versa.

■

Hybrid

– Specifies a hybrid VLAN interface. The port may transmit

tagged or untagged frames.

■

1Q Trunk

– Specifies a port as an end-point for a VLAN trunk. A

trunk is a direct link between two switches, so the port transmits

tagged frames that identify the source VLAN. Note that frames

belonging to the port’s default VLAN (i.e., associated with the PVID)

are also transmitted as tagged frames.

◆

PVID

– VLAN ID assigned to untagged frames received on the interface.

(Default: 1)
When using Access mode, and an interface is assigned to a new VLAN,

its PVID is automatically set to the identifier for that VLAN. When using

Hybrid mode, the PVID for an interface can be set to any VLAN for

which it is an untagged member.

◆

Acceptable Frame Type

– Sets the interface to accept all frame

types, including tagged or untagged frames, or only tagged frames.

When set to receive all frame types, any received frames that are

untagged are assigned to the default VLAN. (Options: All, Tagged;

Default: All)

◆

Ingress Filtering

– Determines how to process frames tagged for

VLANs for which the ingress port is not a member. (Default: Disabled)

■

Ingress filtering only affects tagged frames.

Содержание ECS4810-12M Layer 2





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ECS4810-12M Layer 2

Отзывы:

Edge-Core ECS4810-12M Layer 2, Руководство по управлению, Страница: 181 / 1236

Результаты поиска

Содержание ECS4810-12M Layer 2

Отзывы: