Quick Start Guide
– 3 –
Make Network Connections
Make Management Connections
4
RJ-45 Ports
Connect Category 5e or better twisted-pair cables (UTP or STP is
required) to the RJ-45 ports on the switch.
SFP+ Ports
Install transceivers and then connect fiber optic cabling to the
transceiver ports. Alternatively, connect DAC/AOC cables directly to
the SFP+ ports.
5
Console Port
Connect an RJ-45 to DE-9 straight-through console cable and then
configure the serial connection: 115200 bps, 8 characters, no parity,
one stop bit, 8 data bits, and no flow control.
Hardware Specifications
Switch Interfaces
Management
1 x RJ-45 Console port
1 x USB Management port
Network
24 x 1 GbE RJ-45 ports
4 x 10 GbE SFP+ ports
Switch Chassis
Size (WxDxH)
330 x 230 x 44 mm (13 x 9.1 x 1.7 in)
Weight
2 kg (4.41 lb)
Operating
Temperature
0° C to 45° C (32° F to 113° F)
Storage
Temperature
-40° C to 70° C (-40° F to 158° F)
Humidity
Operating: 5% to 90% (non-condensing)
Storage: 5% to 95% (non-condensing)
Power
Consumption
23 Watts maximum
ECS4130-28T
AC Input
100 to 240 VAC, 50-60 Hz, 0.9 A
ECS4130-28T-DC
DC Input
36 V to 60 V, 2 A Max
Regulatory Compliances
Emissions
EN 55032:2015+A11:2020
EN 61000-3-2:2014
EN 61000-3-3:2013+A1:2019
AS/NZS CISPR32 2015 A1: 2020
ICES-003 Issue 7 Class A
FCC Part 15 subpart B Class A
Immunity
EN 55024:2010+A1:2015
EN 55035:2017+A11:2020
IEC 61000-4-2/3/4/5/6/8/11
Safety
UL (CSA 22.2 No 62368-1 & UL62368-1)
CB (IEC/EN60950-1 & IEC/EN 62368-1)
