Quick Start Guide
– 2 –
Mount the Switch
Ground the Switch
Connect Power
Warning:
For a safe and reliable installation, use only
the accessories and screws provided with the device. Use
of other accessories and screws could result in damage to
the unit. Any damages incurred by using unapproved
accessories are not covered by the warranty.
Avertissement:
Pour une installation sûre et fiable,
utilisez uniquement les accessoires et les vis fournies avec
l’appareil. L’utilisation d’autres accessoires et vis pourrait
endommager l’appareil. Les dommages causés par
l’utilisation d’accessoires non approuvés ne sont pas
couverts par la garantie.
Caution:
The device must be installed in a restricted-access
location.
Attention:
L’appareil doit être installé dans un emplacement
à accès restreint.
Note:
The drawings in this document are for illustration only
and may not match your particular model.
1
Attach the Brackets
Attach the brackets to each side of the switch using the included
screws.
Mount the Switch
Use the screws and cage/clip nuts supplied with the rack to secure the
switch in the rack.
Caution:
Use a UL/IEC/EN 60950-1 certified power supply
to connect to a DC converter.
Attention:
Utilisez une alimentation certifiée UL/IEC/EN
60950-1 pour connecter à un convertisseur CC.
2
Ground the Switch
Attach a #18 AWG stranded copper wire to the grounding terminal on
the switch, and the other end to the rack grounding point.
3
Connect AC Power
Connect the ECS4130-28T AC power socket to an AC power source.
Connect DC Power
The ECS4130-28T-DC requires an external 36 V to 60 V DC power
source connected to its DC terminal block.
Installation
