Edge-Core ECS4110-52P, Руководство по установке

Страница: 12 / 48

Chapter 1
| Switch Description
Overview
– 12 –
Reset Button
Pressing the Reset button on the rear panel causes the switch to perform a hard
reset. For more information, see
“How to Reset the Switch” on page 43 .
System LEDs
For information on system status LED indicators, see “Understanding the System
Status LEDs” on page 40 .
Port LEDs
For information on port status LED indicators, see “Understanding the Port Status
LEDs” on page 29 .
Figure 2: Rear Panel
Console Port
The RJ-45 connector on the front panel far right side that is labeled “Console”
provides an out-of-band serial connection to a terminal or a PC running terminal
emulation software. The port can be used for performing switch monitoring and
configuration. For more information, see
“How to Connect to the Console Port” on
page 41 .
Cooling Fans and Vents
It is recommended that the switch is installed in a properly cooled and ventilated
environment. For more information, see
“Switch Cooling Requirements” on
page 23 .
AC Power Socket
The switch requires a 100-240VAC, 50-60Hz AC power source. For more information
on the switch power input, how to connect it, and how to power-on the switch, see
“How to Connect to AC Power” on page 26 .
Reset Button AC Power Socket
Ground Point
3
1
2
1 3
2