– 1 –
1
2
4
3
11
1.
2 x 100G QSFP-DD
2.
8 x 40G/100G QSFP28
3.
64 x 10G/25G SFP28
4.
Timing ports: 3 x RJ-45 BITS ports,1 x RJ-45 1PPS/ToD port,
1 x 1PPS connector, 1 x 10MHz connector
5.
USB port
6.
RJ-45 Management port
7.
Air filters
8.
Reset button
9.
Console ports: 1 x Micro-USB, 1 x RJ-45
10.
Product tag
11.
DC terminal or AC power socket
12.
Grounding point
13.
5 x fans
7
4
5
6
9
8
10
12
13
Fan Tray Replacement
1.
Press the release latch in the
fan tray handle.
2.
Pull out to remove the fan.
3.
Install replacement fan with
matching airflow direction.
PSU Replacement
1.
Remove the power cord.
2.
Press the release latch and
remove the PSU.
3.
Install replacement PSU with
matching airflow direction.
E082022-MR-R01
150200002491A
www.edge-core.com
Ethernet Switch
AS7946-74XKSB
1.
AS7946-74XKSB
2.
Rack mounting kit — 2 rack-rail assemblies and 20 screws
3.
Console cable — RJ-45 to D-Sub
4.
Documentation — Quick Start Guide (this document) and Safety
and Regulatory Information
Package Contents
Overview
1
2
4
3
Front LEDs
FRU Replacement
Air Filter Replacement
1.
QSFP-DD Port LEDs:
LED1 (top) — Blue (100G)
LED2 (bottom) — Blue (all lanes linked), Off (not all lanes
linked), Blinking (activity)
2.
QSFP28 Port LEDs:
LED1 (left) — Blue (100G), Green (40G)
LED2 (right) — Blue (link), Off (not all lanes linked), Blinking
(activity)
3.
SFP28 Port LEDs:
LED1 (left) — Blue (25G), Green (10G)
LED2 (right) — Blue (link), Blinking (activity)
4.
System LEDs:
DIAG — Green (OK), Amber (fault detected)
LOC — Flashes Amber when the command is activated
FAN — Green (OK), Amber (fault)
PS0 and PS1 — Green (OK), Amber (fault)
5.
Management Port LEDs:
RJ-45 OOB Port — Left (link), Right (activity)
1
3
2
5
4
Air Filter Replacement
1.
Unscrew the filter cover captive screws.
2.
Remove the old filter and install a replacement filter.
3.
Replace the filter cover and tighten the captive screws.
Quick Start Guide