VB-400 Series -
Quickstart Guide - ED-006-021-08
8
Wearable Security for Professionals
CONFIGURING YOUR DEVICE
Prior to using your VB-400 VideoBadge, your
device must be configured and assigned to you
using VideoManager. For detailed information on
how to configure your device, please refer to the
VideoManager User Guide.
Each VideoBadge requires a valid VideoManager
Licence, or access to the Edesix Cloud Service, in
order for you to assign devices and access footage.
For further details, see the VideoManager User
Guide.
To ascertain whether your VideoBadge has been
configured, please view the top left LED on your
device.
This LED will turn solid green once configured and
assigned. Your VideoBadge is charged, assigned
and ready to use when the LEDs shown are both
solid green.
Configured, charged & assigned
Solid
green
light
Please Note: If you try to use your VideoBadge before it has been assigned, the bottom LED on the
front face of the camera will start to flash red and you will hear an alarm tone.
You will not be able to use your camera until it has been assigned.
