1
2
3
4
5
6
SilentPURE Air™
1 Blue Status Light
2 Three Selection Switch
3 Permanent Ozone Filter
4 DC Input Jack
5 ZEPA-1 Filter
6 ZEPA-2 Filter
LOW VOLTAGE ADAPTER 2 SLIDE-IN ZEPA FILTERS
(ALL COUNTRIES UL/CSA/CE LISTED) (INSTALLED)
Green light indicates
power is on.
BEFORE FIRST USE
Before use, remove all packaging materials and inspect the unit for any damage.
If there appears to be any damage, please take the unit back to place of purchase
for a replacement.
PARTS & FEATURES
•
CAUTION:
Never insert your fi ngers or any other objects (hair, clothes,
utensils, knives, screw drivers etc.) into the openings of the guard or close to
the blade when the appliance is connected to the power supply.
•
CAUTION:
DO NOT COVER the appliance in any way in order to avoid
overheating and fi re.
•
CAUTION - RISK OF ELECTRIC SHOCK
: To reduce the risk of electric
shock do not open this device, there are not serviceable parts for customers.
Please contact Customer Service.
OPERATING INSTRUCTIONS
Review these Operating Instructions before operating your unit.
1. Make sure the switch is OFF(0). Insert wall adapter into an AC outlet and
wait until green light turns on, indicating that your adapter has power.
2. Insert the DC input plug into the jack at the bottom right side of the unit.
Make sure it is inserted securely before turning on the power switch.
3. Two replaceable Filters are already installed in the base of the unit.
4. Running your unit 24/7 is suggested for maximum eff ectiveness.
5. As long as the blue light can be seen your unit is working properly.
THREE SELECTION SWITCH
Th ere are three operational controls on the SilentPURE
Air™.
Turn the switch to “1” and the Silent Mode is enabled.
Turn it to “2” and the White Noise function is activated.
Turn it to “3” for the Turbo function.
Turn the switch to OFF(0) aft er use.
REPLACING FILTERS
1. To remove or insert the fi lters (Fig.1), turn the power
switch to OFF(0) and unplug the cord from the wall.
2. Lay your unit on its back and slide out either fi lter
for cleaning or replacing. No tools needed. (Fig.2)
3. To insert a new fi lter, reverse this movement. Be
sure the fi lters are inserted far enough into the unit
that it is level when you turn it right-side up. (Fig.3)
4. Turn the power switch to ON(1).
GENERAL MAINTENANCE
Filter Maintenance
To extend fi lter life, turn the power switch to
OFF(0), remove both fi lters and vacuum front
and back (twice monthly is recommended). Clean
the Front Grill with a damp cloth only. DO NOT
vacuum the Front Grill. Replace the two fi lters at
6 months or sooner if conditions are harsh.
A Word About Filter Service Life for any
Air Cleaner
All air fi lter systems eventually fi ll up with particles and contaminants. Th eir
effi ciency goes from 100% capture capability to zero. Filters get clogged more
FIG.1
FIG.2
FIG.3
