5
The heater’s airflow seems to have diminished.
Make sure the rear intake is not blocked and that the filter is clean. Follow the
Filter Maintenance procedure.
Can the heater be used in a bathroom?
It is not recommended due to the high level of moisture in a bathroom.
Will I be able to use the heater in a basement or garage?
Yes, but keep in mind that rooms with little insulation will not retain the heat
as efficiently. Bare concrete floors, which act as a heat sink with any type of
heating, will absorb some of the heat. Placing the heater a few feet above the
floor will allow for more efficient heating.
Can I use more than one heater at a time?
Yes, but you should make sure they are not on the same circuit. Each heater
and/or appliance should be on its own circuit.
Can I use the heater on a job/construction site?
The heater was not designed to be used in a high dust construction environment.
Using the heater for this purpose will void your warranty.
Can I move the heater around while it is operating?
It is not recommended to move any portable heater while it is operating. We
recommend moving the heater only after the fan has completely turned off.
Can I use the heater and another appliance at the same time?
Yes, as long as they are not on the same circuit. Zone heaters are considered to
be an appliance. You should not run more than one large appli ance on a single
circuit breaker. Your freezer, refrigerator, microwave oven, washing machine,
dryer, and other such appliances should not share a circuit breaker.
Can I use an extension cord, surge protector, or power strip with my heater?
NO. It is not recommended. It is designed to plug directly into a grounded 120
volt 15 amp or higher circuit receptacle.
I don’t have a grounded outlet; can I use a cord adapter or remove the
grounding plug?
NO. If you don’t have a grounded outlet, contact a licensed electrician in
your area for advice. Removing or altering any part of the heater will void the
warranty.
Why doesn’t the temperature on my heater match the temperature display on
my wall or external thermostat?
If using the temperature display for your heater, the temperature on your heater
may vary from the temperature display on another thermostat (like the one
mounted on your wall or a purchased external thermostat). The temperature
sensor on your heater reads the temperature in and around the heater. The
unit is near a cold floor (and heat rises), which in turn will display a cooler
temperature than elevated or external thermostats. The best way to operate
your heater is to just set it to a temperature that feels comfortable to you.
2
WARNING
ANY REQUIRED SERVICE OTHER THAN FILTER MAINTENANCE SHOULD ONLY BE
PERFORMED BY AN AUTHORIZED SERVICE REPRESENTATIVE
Technical Data
Product Name
GEN50 Heater
Model No.
A6035
Rated Voltage
120 V
Rated Power
1500 W
Frequency
60 Hz
Power
Fan Speed +
Fan Speed -
Therapy
Child Lock
Press 3 seconds
Beep
Tempe
Temperature -
Mode
Display Off
Quiet
Timer -
Timer +
Control
Panel
Fan
Speed
Timer
Indicator
Temperature
Mode
Therapy
Fan Speed
Indicator
Timer
Mode
Indicator
Power
