9.
Flame brightness adjustment
a.
There are 5 flame brightness settings.
b.
Press the Light button to switch the brightness of the flame and ember bed colors at
the same time.
10.
Maintenance
a.
Glass Information: Under no circumstances should this product be operated with
missing or broken glass. Do not strike the glass. Do not use abrasive cleaners to
clean the glass. Replacement glass is available from the manufacturer and
replacement should be carried out by a qualified service person.
b.
Cleaning: To clean the unit, first turn off the controls on the unit and unplug the unit
from the power source. The clean the glass door, remove dust with a clean dry cloth
or remove fingerprints and other marks using a clean damp cloth. Do not use
abrasive cleaners or spray liquids on glass door surfaces. Metal and metal painted
parts should be cleaned with a clean damp cloth only. Do not use cleaners or spray
liquids on this surface.
1. Digital display: Indicates the temperature that was set or the amount of time the unit will run.
2. High Fan Mode Button: Speeds up the fan.
3. Low Fan Mode Button: Slows down the fan.
4. Power button: Turns the power on and off.
5. Light button: Adjusts the flame and the brightness of the embers.
6. Flame button: Turns the flame on and off and changes the color of the flame.
7. Ember Bed Button: Adjusts the color of the ember bed.
8. Down button: Decreases the temperature or timer.
9. Up button: Increases the temperature or timer.
10. Timer button: Sets the timer.
11. Heater button: Turns the heat on and switch between high and low fan speed.
©2018 EdenPURE® I-5580 BS7194R-1
Control Panel
