background image

3

The Eden World Tour products group is the result of our quest for ultimate
bass tone and maximum reliability. Your new World Tour Amplifier was
designed, engineered and manufactured equivalent to aircraft vibration
standards and housed in a one-piece aluminum case with steel top to ensure
maximum reliability. The modular design allows quick repair in the field
should such a need arise.

The Eden line of World Tour amplifiers is the result of our research and
development in combining high performance and compact size. Just as a
skilled craftsman needs good quality tools that won't let him down on the
job, so does a good musician. We hope you enjoy the tool we’ve created for
you. Have fun; play low!

Please read this manual in its entirety before operating your new amplifier.
Failure to do so could result in misuse or damage. We’ve taken the time to
write it, which was a lot longer than the time it will take for you to read it.
Help us help you by taking a few moments to learn how to properly use your
new amp. You’ll be glad you did!

CAUTION!

Your ears are your most important piece of equipment.
Unfortunately, they cannot be replaced as easily as your other
gear. Please take the following warning seriously.

This product, when used in combination with loudspeakers
and/or additional amplification may be capable of producing
sound levels that could cause permanent hearing loss. DO NOT
operate at high volume levels or at a level that is uncomfortable.
If you experience any discomfort or ringing in the ears or suspect
hearing loss, you should consult an audiologist.

Thank you for your purchase of an Eden bass guitar product.
This unit has been designed and constructed to give you years of
trouble-free service.

Please take the time to review this manual

and to send in your warranty registration card.

Содержание World Tour Black 1000




















Отзывы: