Connect the adapter to the base of the sprinkler. Attach the lockable quick connect to the end of the hose and
simply snap in the hose to the sprinkler to begin using.
Set-Up with Quick Connect
Cleaning and Maintenance:
If the sprinkler water pressure is low, you may need to clean the built-in
filter. Simply pull the flow control knob and remove the filter. Rinse under
cold water. Then re-insert the filter into the sprinkler.
The Quick Connect Adapter (2 pcs) and Hose
Connector with Water Stop (1 pc) simplify your
watering experience. Simply attach the connector
at the end of your hose. Then, connect the
adapters to your watering tools. Interchange
various tools in a snap without turning off the
water as the adapter will stop the water flow. No
more kinking or hose twisting as the adapter
allows the hose to swivel 360 degrees.
A
C
A B C D
B
D
Quick and easy connections to 5/8-inch and
1/2-inch garden hoses, sprinklers, nozzles, and/or
any other garden watering tools
UNLOCK
LOCK
UNLOCK
LOCK
Twist-and-lock
mechanism prevents
accidental disconnection
CAUTION
-For outdoor use with cold water only
-Do not spray near electrical connections
-When not in use, rinse the tool with water to remove most of the dirt, dry your tool, and store indoors
This product can expose you to chemicals including styrene, which is known to the State of California to cause cancer.
For more information go to
www.P65Warnings.ca.gov
Simply attach the gear driver sprinkler to your hose.
Basic Set-Up
LOCK
WATER
+
How To Clean
