38
Pro-Flo EFI Installation Instructions
©2008 Edelbrock Corporation
Brochure No. 63-3527
Catalog #3527, #3528
Rev. 8/08 - AJ/mc
( 1) Manifold Absolute Pressure sensor
( 1) Manifold Air Temperature sensor
( 1) Coolant Temperature sensor
( 1) Oxygen (O
2
) sensor
( 1) High pressure fuel pump
( 1) Fuel filter
( 1) Fuel pressure regulator
( 8) Fuel injectors
( 1) Main system harness
( 1) Fuel pump wire harness
( 10) Fuel line tie wraps
( 1) Chassis wire harness w/ integrated fuel pump relay
( 1) Intake manifold
( 1) MAP Sensor bracket
( 2) Fuel rail
( 1) Throttle body
( 1) Ignition Harness
( 1) Software CD
( 1) USB/Serial Converter
( 2) Fuel filter adapter fitting
( 1) 3/8” pipe to 5/8” hose fitting
( 1) O
2
sensor weld-in bung
( 1) Distributor
( 1) 1/8” pipe plug
( 3) 10” pigtail
( 1) 1/4” pipe plug
( 1) 3/8” pipe plug
( 4) 1/4” washer
( 15’) -6 fuel return line
( 5) -6 hose end
( 1) 90° elbow fitting
( 1) Fuel crossover line
( 1) Fuel filter clamp
( 1) 1/4” pipe to 3/8” hose fitting
( 1) Return line adapter
( 1) Throttle body gasket
( 15’) -6 fuel line
( 15”) 11/32” PCV hose
( 1) PCV valve
( 1) Std. 1/4-inch Schrader valve
( 5) 1/4”-20 x 1.25” socket head capscrew
( 4) 1/4”-20 x 1” socket head capscrew
( 1) AC adapter
( 1) ECU
( 1) Calibration module cord adapter
( 1) Calibration module cord
( 1) Calibration module
( 1) Throttle bracket
( 1) Mechanical fuel pump block off plate
( 2) 3/8”-5/8” hose clamp
( 1) Ignition coil
( 1) 1/8” pipe to 3/8” hose fitting
( 1) 1/8” pipe to 3/16” hose fitting
( 1) 1/8” pipe to 11/32” hose 90° fitting
( 5”) 7/32” vacuum hose
( 7”) 5/8” hose
( 1) Lube
( 2) 1/4”-20 x .5” socket button head bolt
( 2) 1/4”-20 x .5” hex flange screw
( 1) Fuel regulator nut
( 1) MAT sensor grommet
( 1) 45° fitting
( 2) -6 fuel pump fitting
( 1) -6 to 3/8” pipe adapter
COMPLETE PRO-FLO SYSTEM PARTS
