background image

COPYRIGHT©EDECOA, ALL RIGHT RESERVED,PSW-EU-V2.7------English

3 / 15

1.

WHAT IS THE POWER INVERTER?

The power inverter converts direct-current (DC) low voltage (12V, 24V, 48V) power to 230V alternating-current (AC). You

can connect and operate different devices, for example: microwave, air conditioner, TV, computer or work tools. You must

connect the battery and devices to the inverter. It is simple and you can use it anywhere, anytime, you will always be able to

run your devices from battery.

2.

INTENDED USE

This inverter is used to convert low voltage (Direct Current-DC) into alternating voltage of 230V AC, for example, from

battery or in photovoltaic-island systems.

Please use the inverter according to the following instruction and in accordance with the standards and guidelines applicable

locally. Any other use may cause injury or property damage. These inverters are not suitable for the supply of life support

and / or medical equipment. The inverters are not Uninterruptible Power Supply!

3.

INSTALLATION

3.1

Background

Do not install the inverter on flammable building materials.

Do not install the inverter in areas where flammable or explosive materials are stored.

The inverter must only be installed by sufficient trained personnel in compliance with local safety regulations.

When the inverter is running, the temperature of the chassis and the heat sink can be high. Do not install the

inverter in locations where it can be inadvertently touched.

3.1.1

CHECKING PACKING

Before unpacking, please check to see if the outer package has been damaged; out of the box, you need to check whether the

delivery is complete

3.1.2

CHECKING ACCESSORIES

After unpacking the inverter package, check that the delivery unit is complete and that there is no visible external damage.

If any items are missing or if there is any damage, contact your dealer.

Check that the package contains the deliveries as listed below:

1) Power Inverter ×1

2) One pair of screw cap (Red and Black)

3) One pair of DC input terminal ring (For backup)

4) User manual ×1

5) Ground Cable×1 (Partial model)

Содержание DPP10
















Отзывы: