Eddylight EDD-GL-BFLAT9, Руководство пользователя

Страница: 2 / 11

• Thank you for purchasing our EDD-GL-BFLAT9/EDD-GL-FLAT9 6-in-1 LED light. Please read
these instructions carefully before operating to avoid any possible damage and accidents caused
by misuse.
• The Cube light has a hydrodynamic aluminum shell. Six integrated, highbrightness LED lights
(containing red, green, blue, amber, white+UV) are used to create a wide spectrum of colors. Each
red, green, blue, amber, white and
• UV color can be independently mixed, dimmed, faded and so on. It draws low power and is low
weight, and is remote controllable. The DMX controls include dimming, fade, strobe, gradual change
and more. The unit is compatible with the standard DMX 512 signal for external DMX control.
Practical uses of the product include dance halls, stage backgrounds, hotels and drapery uplighting.
• To reduce risk of electric shock, never open the unit. There are no user serviceable parts, refer service to EDDY
service center.
• Avoid looking directly into the lights.
• Do not expose this unit to any kind of moisture.
• The products housing may become hot during operation. Do not touch.
• Please ensure that the unit is situated in a properly ventilated area. Allow at least 20 inches between this device and
a wall.
• Do not attempt to operate this unit if the power cord has been frayed or broken.
• Do not attempt to break off or remove the ground prong. This prong is used to reduce the risk of electrical shock and
fire in case of an internal short.
• Never plug this unit into a dimmer pack.
• Do not operate this unit if it is damaged.
• This unit is intended for indoor use only.
• During long periods of non-use, disconnect the unit from power source.
• Always mount this unit in a safe and stable matter.
• Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to the point of exit from the unit.
IMPORTANT SAFETY INSTRUCTIONS