Versatrax 150™
Document: UMDW014058.docm
Revision: A03
Created by: KW
Date: 10 Oct 2019
3075415-A03
Source Location: C:\ePDM\ISLEng\products\dw-versatrax150mkii\manuals\UMDW014058.docm
Page 32 of 57
User Ma
nual
Spectrum™ Camera Extension
The optional camera raise extension is a bolt-on bracket which raises the camera by 356 mm (14 in).
1. Remove the camera, handle, bumper bars and mount, and lights and brackets from the vehicle
and install them on the extension bracket. The top of the extension bracket is made with the
same profile as the original camera mount.
2. Bolt the extension bracket onto the original camera mount. The fasteners used depend on the
chassis color. The height of the bracket can be adjusted to six different positions.
a.
Blue
anodized chassis
– 2x ¼-20 x
5
/
8
in SHCS from the back and 1x 3/8-16 x 1¼ in
SHCS from the front.
b. Hard
gray
anodized chassis
– 2x M6 x 16 mm SHCS from the back and 1x M10 x 20 mm
SHCS from the front.
3. Mount the camera and lights as usual on the extension bracket.
4. Install the supplied wiring harness extension to the camera and lights.