Versatrax 100™
Document: UMDT013103.docm
Revision: A10
Created by: KJB
Date: 26 Sep 2019
3070984-A10
Source Location: C:\ePDM\ISLEng\products\dt-versatrax100mkii\manuals\UMDT013103.docm
Page 6 of 41
Us
er
M
an
u
al
Optional Operational Kits
(Parallel Chassis)
Magnet Kit (standard & extended)
Weight Kit (Adds 8 lb (3.6 kg) for traction, standard length)
Camera Extension Kit (3069627). Five spacers up to 6
inches (52 mm).
Auxiliary Lights (Parallel
Chassis)
801 Micro-controlled LEDs
Power Supply (Interface Box)
100-240VAC 50/60Hz, 5A
Certification
The Versatrax 100
™ system is built in accordance with the Low Voltage Directive 2014/35/EU, Machinery
Directive 2006/42/EC, and Electromagnetic Compatibility Directive 2014/30/EU.
Safety
In order to be able to use this product properly and safely, every user must first read these operating
instructions and observe the safety instructions contained therein. Take care of these operating
instructions and keep them in a place where they can be accessed by everyone. Untrained personnel
should not handle or operate this equipment.
CAUTION
: Failure to follow these safety instructions may result in injury or
equipment damage.
This system includes some specific devices that have their own User Manuals. Instructions on those
manuals must be also read before using the system.
WARNING:
High Voltage
36-72 VDC.
If the equipment is powered from a source
other than an Eddyfi provided controller, the power supplied to the product must
have reinforced isolation from the mains with no reference to earth ground.