Minimag™
Document: UMAU011367.docm
Revision: A03
Created by: KJB
Date: 26 Sep 2019
3063241-A03
Source Location: C:\ePDM\ISLEng\products\au-micromag\manuals\UMAU011367.docm
Page 5 of 26
User Ma
nual
Power Requirements
110/220 VAC (Switchable), 50-60Hz, 800W
Operating Temperature
0 ° - 50 °C (32 ° - 122 °F) Dependent on operating
conditions. Ask your sales expert for more
information.
Storage Temperature
-20 - 60° C (0 - 140° F)
*Max payload is based on multiple variables; please refer to the Payload Calculation section.
**For driving the vehicle on curved surfaces, the magnets must be spaced properly; see the Magnet
Spacing section. These are estimates only, and thorough testing for magnetic adherence in all situations
should be performed prior to a full inspection run.
Safety
Personal Safety Equipment
Observe all safety regulations required by law in your place of work. These typically include:
•
Traffic safety protocols
•
Standard personal safety equipment including:
o
Steel toed boots
o
Safety vests
o
Hard hats
o
Gloves
•
Heavy lifting procedures
•
Overhead lifting protocols.
Equipment Safety
Some precautions should be taken to protect the Minimag
™ system from damage.
•
Repair damaged wires before operating the vehicle. A short circuit may damage the power
system, telemetry system, cameras, or any attached equipment.
•
Never drop the vehicle. Although built tough, the vehicle is heavy and can suffer structural
damage when dropped.
•
Prevent impact to the front of the 801 lights and the Spectrum 45
™ camera as they can suffer
damage.
Operational Safety