Eddyfi Technologies INUKTUN MINIMAG Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 26

Eddyfi Technologies INUKTUN MINIMAG Скачать руководство пользователя страница 24

Minimag™

Document: UMAU011367.docm

Revision: A03

Created by: KJB

Date: 26 Sep 2019

3063241-A03

Source Location: C:\ePDM\ISLEng\products\au-micromag\manuals\UMAU011367.docm

Page 24 of 26

User Ma

nual

•

Check for tether or slip ring damage by testing tether continuity.

Tether Re-termination

Tether termination is a specialized service beyond the scope of this manual. Contact your local
representative if the tether is damaged or requires re-termination.

Parts and Repairs

Ordering Parts/Customer Service

Spare and/or replacement parts are available for your product and can be ordered directly from your local
office.

When ordering parts, always make sure to quote the sales order acknowledgement (SOA) number and/or
the serial number of the system component in question.

Inuktun Services Ltd. (Canadian Headquarters and Manufacturing Location)

2569 Kenworth Road, Suite C

Nanaimo, BC, V9T 3M4

CANADA

TF 1.877.468.5886

T +1.250.729.8080

[email protected]

www.eddyfitechnologies.com

Eddyfi Technologies

– US (American Authorized Distributor and Service Centre)

812 W 13th Street

Deer Park, TX, 77536

USA

T +1.281.542.3292

[email protected]

www.eddyfitechnologies.com

Warranty Repairs

Warranty conditions are specified in the Warranty section.

Should any conditions of the manufacturer’s

warranty be breached, the warranty may be considered void. All returned items must be sent prepaid to
Eddyfi Technologies at the above address.

«
...
22
23
24
25
26
»

Содержание INUKTUN MINIMAG



























Отзывы:

Нет отзывов