Microtrac
™
Document: UMDB007595.docm
Revision: B13
Created by: KB
Date: 17 Nov 2019
3042830-B13
Source Location: C:\ePDM\ISLEng\products\db-microtracs4000\manuals\UMDB007595.docm
Page 6 of 26
User Ma
nual
Connector Pin-Out
Standard Tracks
The embedded
Microtrac 4000™ uses a 4-pin Impulse IE-55 connector on the side of the track to connect
power and communications. Contact Eddyfi Technologies for details of the RS-485 control protocol.
Note:
Pin-out is shown for the Bulkhead Connector on the track.
Direct Drive Tracks
The embedded Microtrac 4000 uses a 6-pin Impulse IE-55 connector on the side of the track to connect
motor power, encoder power and encoder signals. Contact Eddyfi Technologies for details of the
encoder feedback.
Note:
Pin-out is shown for the Bulkhead Connector on the track.