Page 4
E-TG10-I-0119
800-638-3326 • edcoinc.com • [email protected]
EQUIPMENT DEVELOPMENT CO., INC.
Read and understand all operating instructions
before operating this equipment.
Death or serious injury can result if this machine is used improperly.
Eye and ear protection must be worn at all times while the grinder is in use. During normal operation,
sound pressure levels may exceed 85dBA. Use only ANSI approved safety glasses to help prevent
eye injury. Everyday eyeglasses have only impact resistant lenses; they are NOT safety glasses.
Operator must wear appropriate clothing and footwear. Do not wear loose clothing or jewelry that
can get tangled in moving parts. Footwear should provide sure footing and protection.
Materials being removed can be toxic or hazardous. A breathing respirator is required to help protect the oper-
ator from inhaling the airborne material when operating this machine.
• Inspect the work surface for cracks, uneven joints and foreign objects such as nails, screws and pipes. Damage
to the disc and/or equipment may result which can also cause serious injury to the operator. Hazardous areas
should be properly identified and clearly marked.
• The TG-10 is designed to be controlled by a single operator .
• Inspect the discs carefully before installing. Do not use
any
questionable disc since serious personal injury and/
or damage to property can result.
• Never operate this grinder while under the influence of drugs, alcohol or when taking medications that impair the
senses or reactions, or when excessively tired or under stress.
• Be sure decals on the machine can be clearly read and understood. Replace worn or missing decals immediately,
Safety Guidelines
Safety warnings and guidelines do not by themselves eliminate danger.
They are not given as substitutes for proper accident prevention procedures and good judgement.
