3
THE MENUS
ProCheck
the screen with the current sensor configuration.
3. Press the up and down arrows to select the new address from
“0” (default) to 1-9, a-z, or A-Z.
4. Press Enter or Save to accept the new address. The screen
refreshes to show the new address setting.
5. Press Esc or Menu to exit the SDI-12 Address Sub Menu.
Note: If you plan on setting addresses on multiple sensors, repeat the
steps 1 through 4 before proceeding to step 5.
Date and Time Sub Menu
To set the date/time on the instrument you can connect to ECH2O
Utility and select the “Set Date/Time” option under the Actions
menu, or you can follow the instructions below to manually update
the date and time.
14
