Eczacibasi VitrA V-Care Basic 5674/431465, Руководство пользователя, Страница: 44 / 148

ID Setting
On instances where you have to install
2 or more V-Cares in a close area, you
have to set ID codes for each V-Care so
that their remote controls will not send
out signals to the neighboring V-Care.
This is done by pairing a remote
controlwith a V-Care unit through
designating anID code for each pair.
You may set upto 15 ID codes which
meansyou can install up to 15
V-Cares in one area.
Press "-" and "+" buttons together
for 3 seconds to set the level
adjustment buttons to ID setting
mode. When doing so, make sure
that the neighboring V-Cares are
turned off.
+
When the level adjustment LED
lights start to blink,set the ID by
pressing "-" and/or "+".When you
have chosen the desired ID code,
leave theremote control untouched
for 5 seconds. The leveladjustment
LED lights will turn off and the ID
setting will be completed.
ID LED DISPLAY ID LED DISPLAY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
The 15 available ID codes are shown in the table below.
Public Area Usage Set-Up- ID Setting
ID Setting
EN
43