ESD CONDUCTIVE CO.,LTD Expert of Static Control
Address :
151#,Houjie Dadao, Houjie Town,Dongguan City,China Post code 523961
E-mail: [email protected]
SAFETY INFORMATION
Please read, understand, and follow all safety information contained in these instructions prior to the use of
this device. Retain these instructions for future reference.
Consult this User
’
s Guide in all cases where Safety Symbol is used, to find out the nature of the potential
HAZARD and any actions to be taken. If the equipment is used in a manner not specified in this User
’
s
Guide, the protection provided by the equipment may be impaired.
Intended Use:
The Smart Ionizing System E-AID202 is a self-contained, ionized air blower designed to remove static charge
from non-conductive objects. The ionizer is designed with a built-in LED touch screen which indicates real
time ion balance, fan speed. It also equipped with automatic emitter points cleaner to periodically clean the
emitter points therefore saving some manual work and time.
WARNING
To reduce the risks associated with hazardous voltage which, if not avoided, could result in serious
injury or death:
•
Be sure that the ground terminal is connected to a grounded cable and the terminal knob tightened.
Failure to do so may result in electrical shock.
•
Do not position the equipment such that it is difficult to disconnect the plug.
•
When doing electrode needle maintenance, be sure to disconnect the AC plug from the outlet. Do not
connect or disconnect the power plug with wet hands as doing so puts you at risk of electrical shock or
injury.
•
In order to prevent accidents, if any of the following problems occur, turn OFF the switch and
disconnect the AC plug from the outlet. Be sure to contact our sales representative or authorized dealer to
request inspection and repair. Repairing the product yourself is dangerous. Never attempt to do so.
-
The fan sometimes does not turn when the switch is turned ON.
-
The fan turns in an abnormally slow or irregular manner.
-
The fan turns but makes abnormal noises.
-
The unit becomes abnormally hot or you smell a burning odor.
-
Any other abnormality or malfunction occurs
•
Do not use the product for any purpose but as described in Intended Use statement.
•
Do not use this device if the power supply or power cord have been damaged.
•
Do not replace power supply or cord with non-3M supplied parts.
•
Do not operate this product in a wet or damp environment.
•
Do not use this equipment on the floor, it is intended to be used on a table top only.
www.esd-conductive.com
