DIGITAL ECU TUNER 3 – User Manual
Signals logging
Dataloger is a basic tool used during tuning of a car. It helps to trace the changes of signals, which are being
logged and modified, and make decisions about the modifications of the tables. Using extra analog inputs, with the
help of the external WBO controller, it is possible to log a current composition of the mixture (AFR). It is also
possible to configure proper scales for every input, which will cause a display of the signal values in the real units
(for example pressure in Bars). More information about scales can be found in the chapter
Scales Configuration
.
Also, it is possible to save and read the saved logs on the disc. This can be done in the
File / Load Log
,
File / Save
log
menu.
1) Log’s area with the signals’ graph logged in,
2) Scales ascribed to signals. The color of a scale matches the color of a logged in signal,
3)
Values currently indicated by the point of the cursor’s log,
4)
Menu (right mouse button) allowing to perform manipulations on a log:
- Hide all -
hides all logged in values.
- Show all -
shows all logged in values.
- Convert MAF to MAP
,
converts data from of the analog flow meter to MAP sensor using the Fuel table
,
- Convert FREQ MAF to MAP,
converts data from the frequency flow meter to MAP sensor using the Fuel
table,
Page 37
www.ecumaster.com
