Partner
®
X5
User's Manual
7
•
Remove the battery compartment cover by sliding it away from
the device.
•
Remove the used batteries and replace them with new ones.
♦
Note:
Do not mix old and new batteries.
•
Make sure to place the batteries according to the polarity
markings (+ -) inside the compartment.
•
Put back the battery compartment cover by sliding it toward the
device. Make sure the cover sits in place properly.
•
Turn the device on to make sure it works correctly.
♦
Note:
You have 2 minutes to replace the batteries without risk of
losing the data stored in RAM.
Do not exceed the 2-minute
limit!
Neither the manufacturer nor the dealer may be held
responsible for the loss of user data.
Initialization
The initialization routine is started
•
when the Partner
®
X5 is turned on for the first time
•
when you remove the batteries (e.g. when replacing them)
for longer than 2 minutes
•
after the system has been reset with the RESET button.
♦
Note:
The RESET button is located on the right-hand side of the
keyboard (over the
button). It can be accessed with any thin
object like a paper clip. Never use a needle or a pin since it can
damage the device.
•
If you see the
Initialize system?
message, press
or touch
or
to abort initialization and customization.
•
If you confirm the prompt, the factory defined settings will be
restored, but you can still prevent your data deletion by canceling
the ensuing prompt
Delete all user’s data
? Press
or touch
or
to preserve your data.
The
System is initialized!
message signals that a system
initialization has been accomplished, freeing memory and restoring
the factory defined settings.
