Partner
®
X5
User's Manual
6
♦
Note:
Electronic communication consumes considerable amount
of energy. Try to always use an external power supply while
connected with a PC.
To restore full functionality of the device and to avoid the risk of
losing user data, replace the complete set of batteries or
recharge
the
accumulators as soon as possible.
How to recharge the accumulators
♦
Make sure the accumulators are inserted in the battery
compartment.
♦
Note:
Only special accumulators – rechargeable pack
1
may be
used with your Partner
®
X5.
♦
Connect an AC/DC adaptor to your device.
♦
Note:
The Partner
®
X5 is equipped with a jack for external power
supply.
♦
Note:
Use of an inappropriate external power supply may
cause failure of the device and void the warranty.
The AC/DC
adapter should provide 9V and min 300mA DC current.
2
The red LED shows that the accumulators are recharging and the
green one shows that the accumulators are charged. The recharge
LED will illuminate when the adaptor is connected.
•
Note:
Accumulators (if inserted in the device) are recharged
every time you connect the adaptor to your device.
How to replace the batteries
•
Press the
key to turn the device off.
•
Note:
Never try to remove the batteries from the device when
the power is on. This can seriously damage the device. If you
experience difficulty turning the device off,
press the RESET
button on the right-hand side of the keyboard (above the
button) and reinstall the system.
1
Please communicate with an Ectaco office to get more information about
this special rechargeable pack purchase.
2
Contact your dealer to order the compatible AC/DC adapter or call +1 (800)
710-7920 within the continental US or +48 (22) 844-16-64 in Poland.