Cincinnati Sub-Zero Products, LLC
Page 16 of 17
Mounting the WarmAir
Unit
The WarmAir
135 unit must be mounted securely before it is used. There are three ways to mount the unit:
1. IV Pole Clamp
The unit may hook onto a secure, vertical IV pole of no less than 2.2 cm and no more than
2.86 cm in diameter.
2. Mounting
The unit may hook onto a secure bed rail or footboard up to 3.8 cm
Bracket
thick.
3. Anti-slip Feet
The unit may be placed on a table or stand near the patient. Do not place the unit in bed with
the patient.
WARNING!
To prevent tipping when mounting the Model 135 unit to an IV
pole, do not clamp the unit higher than 112 cm on an IV pole with a
minimum 61 cm diameter base. When hooking the unit on a rail,
make sure the unit cannot tip to a point where it may fall off the
rail.
When placing the unit on a table or stand near a patient, make sure
the unit is not located in an area where it can be knocked off by
caregivers or passing traffic.
Failure to heed these restrictions may result in IV pole instability,
catheter site trauma, and patient or user injury.
!
